In modern digital dentistry, additive manufacturing (AM) has become a cornerstone for producing surgical guides, prosthetics, aligners, and custom restorations. However, the clinical success and long-term performance of these printed components rely heavily on what happens after the print completes. This presentation focuses on the technical nuances and critical importance of post-processing protocols and environmental stability in dental AM applications.

Designed specifically for dental professionals—this session will examine:

• The material-specific post-processing steps required for dental resins and biocompatible polymers (e.g., washing, curing).
• How deviations in UV curing parameters, solvent purity, and timing affect mechanical properties, dimensional accuracy, and biocompatibility.
• The often-overlooked influence of environmental factors such as ambient light exposure, humidity, particulate control, and temperature stability during post-processing.

You will leave with a deeper understanding of how precise post-processing workflows, supported by controlled surroundings, directly affect fit, function, and patient safety. This knowledge is essential not only for producing high-quality dental components, but also for maintaining trust in digital workflows and ensuring long-term treatment success.

3D printed restorations and devices are toxic until properly post-cured. This presentation will discuss the chemsitry of 3D printing resins and quantifiable metrics for the extent of post-cure.

Whether you're buying your first 3D printer, upgrading or expanding your digital workflow, the decision goes far beyond comparing specs and print samples. Each print is backed by a complex and potentially limited ecosystem. Without careful consideration, you could end up constrained by limitations that don’t align with your clinical requirements.

This hands-on session is for anyone who wants to get the most out of Lychee Slicer. Whether you’re completely new or want to sharpen your skills, Charlie will take you from the fundamentals through to expert-level techniques. You’ll learn how to position models for optimal print success, generate smart supports, create internal voids, and understand why prints fail – and how to fix them. He’ll also cover how to set up new printers, configure resin profiles, and export settings to others in your lab or network.

What You’ll Learn:

• Setting up Lychee for a new printer
• Creating and sharing custom resin profiles
• Advanced model positioning and orientation
• Effective support placement and editing
• Hollowing, drain holes, and why they matter
• Troubleshooting failed prints
• When and why to use Lychee over OEM slicers

Three years ago, I was among those who believed digital dentures would never match the quality of hand-crafted ones. Today, after completing over 1,000 digital denture cases, I can’t imagine going back. In this refreshingly honest session, I’ll share my complete transformation journey—the doubts, the disasters, and ultimately, the breakthroughs that changed everything. If practitioners are hesitant about going digital, this is a session not to miss.

Content Overview

• My resistance story (and what finally changed my mind)
• The learning curve: Timeline, mistakes, and milestones
• Case evolution: Comparing my first 10 vs. my last 10 digital cases
• The hybrid approach: Keeping the best of both worlds
• Unexpected discoveries that transformed my practice
• A transition roadmap based on 1,000+ cases

Key Learning Outcomes

• Realistic transition timelines – Understand the actual learning curve, key milestones, and how to overcome early resistance
• Common mistake prevention – Learn from costly errors I encountered so you don’t have to
• Hybrid workflow strategies – How to honour and build on traditional denture skills within a digital framework
• Milestone markers for success – Discover the unexpected benefits of transitioning to digital dentistry

This candid, experience-driven session offers practitioners a realistic roadmap for adopting digital dentures, based on both clinical and technical insights. Rather than theoretical promises, attendees will gain practical guidance from someone who has taken the full journey—and started out a sceptic.

Whether you're considering the digital transition, struggling with early adoption, or looking to refine your current digital workflow, this session provides honest strategies for successfully integrating digital dentures into daily practice—while preserving the craftsmanship and quality care of traditional methods.

Immediate dentures are among dentistry's most challenging procedures. Let’s explore how digital workflows are revolutionizing same-day transformations, making the 'impossible' feel like routine through predictable protocols that provide consistent outcomes every time.

Content Overview

• The Immediate Denture Paradox: The drawbacks of traditional immediates and how digital workflows solve these problems
• Digital Planning Revolution: Digital tooth extraction and socket prediction methodology for post-extraction anatomy
• Material Strategy: 3D-printed vs. milled – clinical outcomes with science-based selection criteria
• Case Study – A complete immediate denture journey using the Ivotion digital denture system
• Clinical Timeline Management: The conversion protocol with healing milestones and decision points
• Patient Communication Framework: Managing expectations and protocol summary

Key Learning Outcomes

• Master digital tooth extraction and socket prediction techniques
• Design immediate dentures that account for tissue changes and healing protocols
• Strategic material selection – Why milled dentures outperform 3D-printed options
• Navigate challenging anatomical situations using digital planning
• Manage patient expectations and clinical timelines for optimal outcomes
• Implement the 6-month conversion timeline for predictable results

This session tackles one of dentistry's most complex challenges by demonstrating how digital planning and strategic material selection create predictable outcomes in traditionally unpredictable situations. Attendees will witness patient transformations while learning the complete workflow for immediate denture success. This will translate to practitioners gaining confidence to adopt a digital workflow for immediate dentures themselves.

Discover the Power of 3Shape Diagnostics! Join us for a 45-minute, hands-on workshop designed to transform the way you approach diagnostics in your practice. Get up close with the latest TRIOS 6 scanner and the new DxPlus software as we walk through real-time scanning and diagnostic workflows.

You'll see how TRIOS 6 delivers detailed insights in tooth wear, gum recession, surface and interproximal caries, and digital plaque disclosure.

Whether you're already scanning or just getting started, this session will show you how to turn everyday scans into stronger diagnostics, clearer communication, and better patient care.

Reserve your spot and see it in action.

Discover the Power of 3Shape Diagnostics! Join us for a 45-minute, hands-on workshop designed to transform the way you approach diagnostics in your practice. Get up close with the latest TRIOS 6 scanner and the new DxPlus software as we walk through real-time scanning and diagnostic workflows.

You'll see how TRIOS 6 delivers detailed insights in tooth wear, gum recession, surface and interproximal caries, and digital plaque disclosure.

Whether you're already scanning or just getting started, this session will show you how to turn everyday scans into stronger diagnostics, clearer communication, and better patient care.

Reserve your spot and see it in action.

Please visit the workshop registration desk to register for this workshop.

In this workshop, dental technician Eli Ibrahim will present a hands-on demonstration focussing on how to characterise and finish crowns milled chairside for predictable results. The session will include:

• When to use Felspar, Hybrid or Glass blocks depending on the indication
• Stain and Glaze technique for predictable results including a demonstration
• How to polish in order to achieve the best results
• Tips and tricks when polishing
• How to achieve accurate shades in relation to your shade guide
• Achieving the best results using VITA Akzent Plus Stain and Glaze

The session will include a hands-on demo of:

• Stain and glaze technique
• Polishing Technique

Please visit the workshop registration desk to register for this workshop.

In this workshop, dental technician Eli Ibrahim will present a hands-on demonstration focussing on how to characterise and finish crowns milled chairside for predictable results. The session will include:

• When to use Felspar, Hybrid or Glass blocks depending on the indication
• Stain and Glaze technique for predictable results including a demonstration
• How to polish in order to achieve the best results
• Tips and tricks when polishing
• How to achieve accurate shades in relation to your shade guide
• Achieving the best results using VITA Akzent Plus Stain and Glaze

The session will include a hands-on demo of:

• Stain and glaze technique
• Polishing Technique

Whether you want to use an intra oral scanner or a lab scanner or both, you must get your records, be it impression or MMR and the like somehow to dive into digital dentures.

There are a plethora of methods available and surprisingly if you don't want to change the way you work in a major way you actually don't have to to still take advantage of the advances in digital dentures. This talk will discuss the different methods and key concepts of obtaining and digitising records for full and partial dentures ready for design. Practical demonstrations will be undertaken with the latest technology to digitise records at lightning speeds never seen before.

Dentist, Prosthetist or Lab technician do not miss this as it will stat you on your journey to Digital Dentures or at least get you thinking!

In today’s digital world, computers are as essential to dentistry as handpieces and impression trays once were. But for many dental professionals, the terminology can feel overwhelming. This talk strips away the jargon and delivers a clear, beginner-friendly guide to understanding computers—no tech background required.

We’ll start with the basics: what a computer is made of, and what terms like CPU, RAM, SSD, and GPU actually mean. You’ll learn how these components affect the speed and performance of everyday tasks—from running dental software to handling large files.

Next, we’ll explore how computers store data. What’s the difference between a hard drive and a solid-state drive? What is the cloud, and when should you use it? We’ll also cover simple networking concepts so you understand how devices talk to each other—whether in a single clinic or across multiple locations.

Finally, we’ll explain why backup matters, how to protect your data, and what a good backup system looks like in a dental setting. This includes practical advice on USB drives, external hard drives, cloud services, and automated backup tools.

This talk is perfect for any dental professional—clinical or administrative—who wants to feel more confident using and managing technology in the modern practice. You don’t need to be a tech expert—but after this session, you’ll speak the language.

Designing dentures with CAD has actually been around for over 10 years and has evolved now to a mature technology. The two main softwares of choice are 3Shape and exocad but where do you start?

This talk will start at the beginning and demonstrate the concepts needed to be able to start designing digital dentures to a professional level. Practical demonstrations will be given of both softwares and the pros and cons of each will be discussed. If you are interested in Digital Dentures in any way this is the lecture you must not miss as it will enlighten you to design concepts you may not have thought about before.

DGSHAPE has over 20,000 Dental milling machines in the Global Market. With over 15 years of Dental Milling machine manufacturing experience, technology has evolved. Craig will cover off the latest generation of DGSHAPE Milling machines including the DWX-43W wet Mill, recently launched in Cologne as well as an update on the DWX-53DC and DWX-53D dry milling machines.

Capturing the exact position of multiple implants exactly has either been a headache or if done digitally been very expensive. Regardless, it's one of the most important aspects of the design and manufacture of provisional and final prosthesis in the All on X workflow. In this lecture Photogrammetry will be demystified and explained and new affordable technologies will be discussed and demonstrated using this technology that takes the headache and " guesswork " out of clinical and laboratory techniques . If you are placing implants, restoring implants or doing the technical work for implants you need too know about these technologies as they will strip hours from your conventional workflows, do not miss this.

Facial scanning, Intra Oral Scanning, Smile Design and Cone Beam Computed Tomography (CBCT) has revolutionised the way we work. Combining these technologies puts it into another dimension completely and has created what we know as The Digital Patient. However, many people are not utilising this technology or at least not to its fullest potential. In this talk we will discuss the technologies available, how to put these into practice and how to merge the technologies to create the Digital Patient and how to use this technology for diagnosis treatment panning and appliances or restorations. Dentist or Lab technician this is the talk you need to attend so you don't get left behind when the Digital patient becomes the norm.

Print or Mill or both? After scan and design comes manufacture and now we are given an enormous choice when it comes to digital denture manufacture. This lecture will strip back all the fiction and really get down to the facts about digital denture manufacture. What are the new 3D printing technologies and materials for digital dentures? What are the new technologies for partial dentures ? What printer do I need ? What are the new laws applicable to digital manufacture of long term biocompatible appliances? For milling: what are the new methods available ? What are the new materials? What can I expect as a ROI?

As digital workflows continue to revolutionise removable prosthetics, denture milling has emerged as a powerful alternative to traditional processing. In this practical and informative session, we’ll explore the advantages, limitations, and workflows involved in milling dentures using DGSHAPE systems by Roland.

Attendees will be guided through the full digital denture production process—from digital impressions and CAD design through to CAM setup, material selection, and final milling. We’ll demystify the hardware and software involved, highlighting key considerations for achieving consistent, accurate, and aesthetic results.

The talk will cover:

• An overview of DGSHAPE mills suited for denture production (DWX series)
• Suitable materials for baseplates and teeth (PMMA, multilayer discs, bonded workflows)
• Step-by-step CAM strategies: nesting, toolpath optimisation, and finishing protocols
• How milled dentures compare to 3D printed and conventionally processed options
• Tips for integrating milling into an existing lab or clinic workflow

Whether you’re a dental technician looking to improve output, a clinician considering in-house production, or a practice exploring digital dentures for the first time, this session will give you a clear understanding of what’s possible with DGSHAPE milling—and how to implement it efficiently.

Regardless of how a denture is manufactured - either traditional, milled or 3D-printed - the aesthetics can always be improved by a number of means. Tooth position, shape and size pay an enormous role as well as tooth surface texture and of course colour effect enhancing using staining and glazing techniques. This talk will discuss getting the most out of your digital dentures and how to make them "pop" using a variety of methods and materials from different manufacturers, some new techniques and materials recently released and comparing and contrasting the same.

Modern 3D printers are easy to use, however a thorough understanding of their correct operation is imperative to avoid expensive pitfalls that can, in some cases, render a machine useless. This talk will discuss correct everyday routines for the use and maintenance of 3D printers to achieve great results every time and to prolong the lifespan of the machine.

This focused session explores a complete digital workflow using Dentaurum CADback software alongside Ceramotion Z zirconia and titanium discs, and Ceramotion One Touch stains and glazes.

We’ll cover how CADback simplifies the design of crowns, bridges, and implant bars in open systems, and how Ceramotion Z discs and powders deliver strength and aesthetics in both monolithic and layered restorations. You'll also learn practical characterisation techniques using Ceramotion stains and glazes for both zirconia and titanium, bringing monolithic restorations to life with minimal effort.

Ideal for technicians and digital labs, this talk delivers a streamlined approach to combining design, material choice, and finishing for high-end results.

Evolutions in implant dentistry design and technology are calling into question the need for abutments altogether. This lecture will address the pros and cons of eliminating the abutment in full arch dentistry, including covering the use of the Powerball and Vortex screws for direct to fixture attachment as well as the novel TRI Matrix Implant that eliminates abutments entirely.

This session will reflect on the influences in the decision making process when choosing technology to introduce into clinical practice.

This session explores what SprintRay's latest printers and resins could mean to your clinic or laboratory, including the new MIDAS, Pro 2, Retainer Resin and an update on Partner collaborations. The latest cloud software and workflows will be demonstrated and the new global partner collaborations will be discussed and how they fit into the Sprintray EcoSystem.

In this talk, we will discuss digital workflows and discuss where digital dentistry benefits us as far as ease of use, accuracy, cost and predictability. We will also discuss where digital workflows can be deficient and may not be the best alternative. This discussion aims to help you discuss which workflows will work in your practice or lab.

With the global rise in dental implant placements, there has also been a notable increase in implant-related complications and failures. Among these, biological complications—characterised by peri-implant bone and soft tissue loss, chronic inflammation and aesthetic concerns—are particularly critical due to their often irreversible nature.

Traditionally, these complications have been attributed to biofilm-related infections or to hard and soft tissue trauma resulting from surgical factors. However, emerging evidence highlights additional, and perhaps unexpected, contributors: implant restorations and abutments.

This lecture will explore the evolving understanding of how restorations and abutments may influence peri-implant tissue stability. It will present strategies to mitigate their negative impact and critically examine whether abutments are really necessary in contemporary or future implantology and how digital dentistry plays a key role in this evolution.

This session will explore characterisation of hybrid Cerasmart270 or composite blocks using the Optiglaze staining kit. Learn how to paint lifelike hybrid, composite and acrylic restorations.

In this practical session, Charlie Anderson shares proven strategies to improve the efficiency of your dental 3D printing workflow. Whether you’re a technician or clinic owner, learn how to reduce print failures, optimise your print settings, and implement simple time-saving techniques. Charlie will walk through real-world examples and best practices to help you reduce costs, speed up turnaround times, and produce consistent results across cases.

Key takeaways:

• Efficient printer setup and calibration
• Print layout tips to reduce waste and errors
• Choosing the right resin for each application
• Support placement strategies to minimise cleanup
• Time-saving tools and workflow hacks

This lecture will explore the basic workflow, properties and advantages of the LiSi block. It will include how to polish LiSi blocks, which polishers to use and how to do fast and proper staining.

A precise scan is the foundation of every successful digital prosthesis—and the Nexus Osteon System is changing how full arch data is captured. In this focused lecture, Dr Craig Duval demonstrates how this innovative scanning system delivers fast, highly accurate, and consistent results, specifically tailored for full arch implant cases.

Designed for general dentists moving toward a fully digital workflow, this session covers how to capture optimal intraoral scans for edentulous arches, handle scan body protocols effectively, and generate data that integrates smoothly into digital prosthesis design workflows.

Through practical tips, case examples, and workflow demonstrations, you'll learn how to improve efficiency, reduce errors, and ensure better-fitting final restorations by starting with the right data. Whether you're looking to adopt digital prosthetic workflows or refine your current approach, this lecture will equip you with the tools to plan and restore with confidence—starting at the scan.

In the era of digital dentistry, we are moving beyond conventional imaging to embrace a new paradigm: a diagnostic-centered platform that drives treatment decisions. This session will explore the remarkable evolution of CBCT technology—from basic 2D panoramic views to advanced 3D imaging and now to real-time 5D diagnostic systems—and reveal how these changes are reshaping clinical workflows.

You’ll be introduced to the latest features such as the 5D Slice Explorer for real-time sectional navigation, AI-powered diagnostics, facial scan integration, and 3D simulations for implants and endodontics. These innovations are not only enhancing image clarity and diagnostic speed, but also improving patient understanding.

Striking the perfect balance between reliability and precision, ICE Plus zirconia offers a powerful combination of high flexural strength — up to 1,900 MPa when HIP-treated (1,650 MPa without HIP) — and excellent aesthetics, making this high-performance material the ideal solution for metal-free primary structures. In this lecture, DT Rian Barnard will present the complete digital and clinical workflow through real-life cases, showcasing how Fusion Powder enables the bonding of a secondary zirconia structure for durable, uncompromised results.

This session will explore the concept Of GC INITIAL ONE SQIN for NATUROMIMETIC Staining and Micro-Layering. Understand and imitate the optical properties of natural teeth in simple steps. Advanced knowledge on properties of light + presentation of the new Lustre Paste ONE and the new micro-layering concept of SQIN with a step-by-step show case.

This session will review the properties and advantages of LiSi Press. Learn how to "Press to Perfection" - perfectly Sprue - Press - Devest with LiSi Press.